data sheet 3-phase filters fn 3258 ultra-compact emc/rfi filter for motor drives appli cations new: solid safety connector blocks available for the whole range exceptional attenuation performance from 150 khz to 30 mhz excellent saturation resistance up to 50 m cable length most compact and slim filter design in its class technical specifications design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 flammability corresponding to ul 94 v-2 or better high potential test voltage p C> e 2650 vdc for 2 sec p C> p 2100 vdc for 2 sec maximum continuous operating voltage 3x 480/277 vac (fn 3258) 3x 520/300 vac (fn 3258h) mtbf @ 50c/400v (mil-hb-217f) 300,000 hours operating frequency dc to 60 hz overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour protection category ip20 rated currents 7 to 180 a @ 50 c temperature range (operation and storage) -25 c to +100 c (25/100/21) approvals features and benefits the extremely compact and slim filter design allows a trouble-free installation even where the availabl e mounting space is minimal with new additional filter types providing safety terminal blocks, the most preferred connection styl e can be chosen fast and easy. this helps to stay in line with the electrical connection concept of a given application fn 3258 filters ensure compliance with class a limi ts according to en 55011 up to 50 m cable length and beyond. further they can contribute significantly t o meet conducted emission limits according to class b filter operation on the mains input side of consumers increases their reliability and conducted immunity significant chokes with exceptional saturation resistance and excellent thermal behavior are a vital part of fn 3 258 design. thus, all filters retain the expected filte r performance even in very noisy applications and under full load conditions typical applications three-phase variable speed motor drives, servo drives, inverters and converters applications comprising energy conversion devices like machines or process automation equipment hvac equipment, elevators, power supplies, ups and further three-phase applications typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter rated current typical drive leakage current** po wer loss input/output weight @ 50 c (40c) power rating* @ 400 vac/50 hz @ 25 c / 50 hz connections [a] [kw] [ma] [w] [kg] fn 3258-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258-30-33 30 (32.9) 15 33.0 11.8 -33 1.2 fn 3258-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258-55-34 55 (60.2) 30 33.0 25.9 -34 2.0 fn 3258-75-34 75 (82.2) 37 33.0 32.2 -34 2.7 fn 3258-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258-180-40 180 (197.1) 90 33.0 58.3 -40 6.0 fn 3258h-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258h-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258h-30-33 30 (32.9) 18.5 33.0 11.8 -33 1.2 fn 3258h-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258h-55-34 55 (60.2) 37 33.0 25.9 -34 2.0 fn 3258h-75-34 75 (82.2) 45 33.0 32.2 -34 2.7 fn 3258h-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258h-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258h-180-40 180 (197.1) 110 33.0 58.3 -40 6.0 * calculated at rated current, 440 vac (fn 3258)/ 480 vac (fn 3258h) and cos phi = 0.8. the exact val ue depends upon the efficiency of the drive, the mo tor and the entire application. ** maximum leakage under normal operating condition s. note: if two phases are interrupted, worst case leakage could reach 5.4 times higher levels. typical filter attenuation per cispr 17; a = 50 ? /50 ? sym; b = 50 ? /50 ? asym; c = 0.1 ? /100 ? sym; d = 100 ? /0.1 ? sym 7 to 42 a types 55 to 100 a types 130 and 180 a types emc/emi products schaffner group datasheets 2014 mechanical data note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a a 190 250 270 310 250 270 270 270 380 b 40 45 50 50 85 80 90 90 120 c 70 70 85 85 90 135 150 150 170 d 160 220 240 280 220 240 240 240 350 e 180 235 255 295 235 255 255 255 365 f 20 25 30 30 60 60 65 65 102 g 4.5 5.4 5.4 5.4 5.4 6.5 6.5 6.5 6.5 h 1 1 1 1 1 1.5 1.5 1.5 1.5 i 22 22 25 25 39 39 45 45 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 k 20 22.5 25 25 42.5 40 45 45 60 l2 29.5 29.5 39.5 37.5 26.5 70.5 64 64 47 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -33 -34 -35 -40 -44 solid wire 16 mm 2 35 mm 2 50 mm 2 95 mm 2 10 mm 2 flex wire 10 mm 2 25 mm 2 50 mm 2 95 mm 2 6 mm 2 awg type wire awg 6 awg 2 awg 1/0 awg 4/0 awg 8 recommended torque 1.5-1.8 nm 4.0-4.5 nm 7 8 nm 17-20 nm 1.5-1.8 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
2 data sheet 3-phase filters fn 3258 ultra-compact emc/rfi filter for motor drives appli cations new: solid safety connector blocks available for the whole range exceptional attenuation performance from 150 khz to 30 mhz excellent saturation resistance up to 50 m cable length most compact and slim filter design in its class technical specifications design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 flammability corresponding to ul 94 v-2 or better high potential test voltage p C> e 2650 vdc for 2 sec p C> p 2100 vdc for 2 sec maximum continuous operating voltage 3x 480/277 vac (fn 3258) 3x 520/300 vac (fn 3258h) mtbf @ 50c/400v (mil-hb-217f) 300,000 hours operating frequency dc to 60 hz overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour protection category ip20 rated currents 7 to 180 a @ 50 c temperature range (operation and storage) -25 c to +100 c (25/100/21) approvals features and benefits the extremely compact and slim filter design allows a trouble-free installation even where the availabl e mounting space is minimal with new additional filter types providing safety terminal blocks, the most preferred connection styl e can be chosen fast and easy. this helps to stay in line with the electrical connection concept of a given application fn 3258 filters ensure compliance with class a limi ts according to en 55011 up to 50 m cable length and beyond. further they can contribute significantly t o meet conducted emission limits according to class b filter operation on the mains input side of consumers increases their reliability and conducted immunity significant chokes with exceptional saturation resistance and excellent thermal behavior are a vital part of fn 3 258 design. thus, all filters retain the expected filte r performance even in very noisy applications and under full load conditions typical applications three-phase variable speed motor drives, servo drives, inverters and converters applications comprising energy conversion devices like machines or process automation equipment hvac equipment, elevators, power supplies, ups and further three-phase applications typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter rated current typical drive leakage current** po wer loss input/output weight @ 50 c (40c) power rating* @ 400 vac/50 hz @ 25 c / 50 hz connections [a] [kw] [ma] [w] [kg] fn 3258-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258-30-33 30 (32.9) 15 33.0 11.8 -33 1.2 fn 3258-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258-55-34 55 (60.2) 30 33.0 25.9 -34 2.0 fn 3258-75-34 75 (82.2) 37 33.0 32.2 -34 2.7 fn 3258-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258-180-40 180 (197.1) 90 33.0 58.3 -40 6.0 fn 3258h-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258h-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258h-30-33 30 (32.9) 18.5 33.0 11.8 -33 1.2 fn 3258h-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258h-55-34 55 (60.2) 37 33.0 25.9 -34 2.0 fn 3258h-75-34 75 (82.2) 45 33.0 32.2 -34 2.7 fn 3258h-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258h-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258h-180-40 180 (197.1) 110 33.0 58.3 -40 6.0 * calculated at rated current, 440 vac (fn 3258)/ 480 vac (fn 3258h) and cos phi = 0.8. the exact val ue depends upon the efficiency of the drive, the mo tor and the entire application. ** maximum leakage under normal operating condition s. note: if two phases are interrupted, worst case leakage could reach 5.4 times higher levels. typical filter attenuation per cispr 17; a = 50 ? /50 ? sym; b = 50 ? /50 ? asym; c = 0.1 ? /100 ? sym; d = 100 ? /0.1 ? sym 7 to 42 a types 55 to 100 a types 130 and 180 a types emc/emi products schaffner group datasheets 2014 mechanical data note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a a 190 250 270 310 250 270 270 270 380 b 40 45 50 50 85 80 90 90 120 c 70 70 85 85 90 135 150 150 170 d 160 220 240 280 220 240 240 240 350 e 180 235 255 295 235 255 255 255 365 f 20 25 30 30 60 60 65 65 102 g 4.5 5.4 5.4 5.4 5.4 6.5 6.5 6.5 6.5 h 1 1 1 1 1 1.5 1.5 1.5 1.5 i 22 22 25 25 39 39 45 45 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 k 20 22.5 25 25 42.5 40 45 45 60 l2 29.5 29.5 39.5 37.5 26.5 70.5 64 64 47 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -33 -34 -35 -40 -44 solid wire 16 mm 2 35 mm 2 50 mm 2 95 mm 2 10 mm 2 flex wire 10 mm 2 25 mm 2 50 mm 2 95 mm 2 6 mm 2 awg type wire awg 6 awg 2 awg 1/0 awg 4/0 awg 8 recommended torque 1.5-1.8 nm 4.0-4.5 nm 7 8 nm 17-20 nm 1.5-1.8 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
3 data sheet 3-phase filters fn 3258 ultra-compact emc/rfi filter for motor drives appli cations new: solid safety connector blocks available for the whole range exceptional attenuation performance from 150 khz to 30 mhz excellent saturation resistance up to 50 m cable length most compact and slim filter design in its class technical specifications design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 flammability corresponding to ul 94 v-2 or better high potential test voltage p C> e 2650 vdc for 2 sec p C> p 2100 vdc for 2 sec maximum continuous operating voltage 3x 480/277 vac (fn 3258) 3x 520/300 vac (fn 3258h) mtbf @ 50c/400v (mil-hb-217f) 300,000 hours operating frequency dc to 60 hz overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour protection category ip20 rated currents 7 to 180 a @ 50 c temperature range (operation and storage) -25 c to +100 c (25/100/21) approvals features and benefits the extremely compact and slim filter design allows a trouble-free installation even where the availabl e mounting space is minimal with new additional filter types providing safety terminal blocks, the most preferred connection styl e can be chosen fast and easy. this helps to stay in line with the electrical connection concept of a given application fn 3258 filters ensure compliance with class a limi ts according to en 55011 up to 50 m cable length and beyond. further they can contribute significantly t o meet conducted emission limits according to class b filter operation on the mains input side of consumers increases their reliability and conducted immunity significant chokes with exceptional saturation resistance and excellent thermal behavior are a vital part of fn 3 258 design. thus, all filters retain the expected filte r performance even in very noisy applications and under full load conditions typical applications three-phase variable speed motor drives, servo drives, inverters and converters applications comprising energy conversion devices like machines or process automation equipment hvac equipment, elevators, power supplies, ups and further three-phase applications typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter rated current typical drive leakage current** po wer loss input/output weight @ 50 c (40c) power rating* @ 400 vac/50 hz @ 25 c / 50 hz connections [a] [kw] [ma] [w] [kg] fn 3258-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258-30-33 30 (32.9) 15 33.0 11.8 -33 1.2 fn 3258-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258-55-34 55 (60.2) 30 33.0 25.9 -34 2.0 fn 3258-75-34 75 (82.2) 37 33.0 32.2 -34 2.7 fn 3258-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258-180-40 180 (197.1) 90 33.0 58.3 -40 6.0 fn 3258h-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258h-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258h-30-33 30 (32.9) 18.5 33.0 11.8 -33 1.2 fn 3258h-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258h-55-34 55 (60.2) 37 33.0 25.9 -34 2.0 fn 3258h-75-34 75 (82.2) 45 33.0 32.2 -34 2.7 fn 3258h-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258h-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258h-180-40 180 (197.1) 110 33.0 58.3 -40 6.0 * calculated at rated current, 440 vac (fn 3258)/ 480 vac (fn 3258h) and cos phi = 0.8. the exact val ue depends upon the efficiency of the drive, the mo tor and the entire application. ** maximum leakage under normal operating condition s. note: if two phases are interrupted, worst case leakage could reach 5.4 times higher levels. typical filter attenuation per cispr 17; a = 50 ? /50 ? sym; b = 50 ? /50 ? asym; c = 0.1 ? /100 ? sym; d = 100 ? /0.1 ? sym 7 to 42 a types 55 to 100 a types 130 and 180 a types emc/emi products schaffner group datasheets 2014 mechanical data note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a a 190 250 270 310 250 270 270 270 380 b 40 45 50 50 85 80 90 90 120 c 70 70 85 85 90 135 150 150 170 d 160 220 240 280 220 240 240 240 350 e 180 235 255 295 235 255 255 255 365 f 20 25 30 30 60 60 65 65 102 g 4.5 5.4 5.4 5.4 5.4 6.5 6.5 6.5 6.5 h 1 1 1 1 1 1.5 1.5 1.5 1.5 i 22 22 25 25 39 39 45 45 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 k 20 22.5 25 25 42.5 40 45 45 60 l2 29.5 29.5 39.5 37.5 26.5 70.5 64 64 47 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -33 -34 -35 -40 -44 solid wire 16 mm 2 35 mm 2 50 mm 2 95 mm 2 10 mm 2 flex wire 10 mm 2 25 mm 2 50 mm 2 95 mm 2 6 mm 2 awg type wire awg 6 awg 2 awg 1/0 awg 4/0 awg 8 recommended torque 1.5-1.8 nm 4.0-4.5 nm 7 8 nm 17-20 nm 1.5-1.8 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
4 data sheet 3-phase filters fn 3258 ultra-compact emc/rfi filter for motor drives appli cations new: solid safety connector blocks available for the whole range exceptional attenuation performance from 150 khz to 30 mhz excellent saturation resistance up to 50 m cable length most compact and slim filter design in its class technical specifications design corresponding to ul 1283, csa 22.2 no. 8 1986, iec/en 60939 flammability corresponding to ul 94 v-2 or better high potential test voltage p C> e 2650 vdc for 2 sec p C> p 2100 vdc for 2 sec maximum continuous operating voltage 3x 480/277 vac (fn 3258) 3x 520/300 vac (fn 3258h) mtbf @ 50c/400v (mil-hb-217f) 300,000 hours operating frequency dc to 60 hz overload capability 4x rated current at switch on, 1.5x rated current for 1 minute, once per hour protection category ip20 rated currents 7 to 180 a @ 50 c temperature range (operation and storage) -25 c to +100 c (25/100/21) approvals features and benefits the extremely compact and slim filter design allows a trouble-free installation even where the availabl e mounting space is minimal with new additional filter types providing safety terminal blocks, the most preferred connection styl e can be chosen fast and easy. this helps to stay in line with the electrical connection concept of a given application fn 3258 filters ensure compliance with class a limi ts according to en 55011 up to 50 m cable length and beyond. further they can contribute significantly t o meet conducted emission limits according to class b filter operation on the mains input side of consumers increases their reliability and conducted immunity significant chokes with exceptional saturation resistance and excellent thermal behavior are a vital part of fn 3 258 design. thus, all filters retain the expected filte r performance even in very noisy applications and under full load conditions typical applications three-phase variable speed motor drives, servo drives, inverters and converters applications comprising energy conversion devices like machines or process automation equipment hvac equipment, elevators, power supplies, ups and further three-phase applications typical electrical schematic emc/emi products schaffner group datasheets 2014 filter selection table filter rated current typical drive leakage current** po wer loss input/output weight @ 50 c (40c) power rating* @ 400 vac/50 hz @ 25 c / 50 hz connections [a] [kw] [ma] [w] [kg] fn 3258-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258-30-33 30 (32.9) 15 33.0 11.8 -33 1.2 fn 3258-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258-55-34 55 (60.2) 30 33.0 25.9 -34 2.0 fn 3258-75-34 75 (82.2) 37 33.0 32.2 -34 2.7 fn 3258-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258-180-40 180 (197.1) 90 33.0 58.3 -40 6.0 fn 3258h-7-44 7 (7.7) 4 33.0 3.8 -44 0.5 fn 3258h-16-44 16 (17.5) 7.5 33.0 6.1 -44 0.8 fn 3258h-30-33 30 (32.9) 18.5 33.0 11.8 -33 1.2 fn 3258h-42-33 42 (46.0) 22 33.0 15.7 -33 1.4 fn 3258h-55-34 55 (60.2) 37 33.0 25.9 -34 2.0 fn 3258h-75-34 75 (82.2) 45 33.0 32.2 -34 2.7 fn 3258h-100-35 100 (109.5) 55 33.0 34.5 -35 4.3 fn 3258h-130-35 130 (142.4) 75 33.0 43.1 -35 4.5 fn 3258h-180-40 180 (197.1) 110 33.0 58.3 -40 6.0 * calculated at rated current, 440 vac (fn 3258)/ 480 vac (fn 3258h) and cos phi = 0.8. the exact val ue depends upon the efficiency of the drive, the mo tor and the entire application. ** maximum leakage under normal operating condition s. note: if two phases are interrupted, worst case leakage could reach 5.4 times higher levels. typical filter attenuation per cispr 17; a = 50 ? /50 ? sym; b = 50 ? /50 ? asym; c = 0.1 ? /100 ? sym; d = 100 ? /0.1 ? sym 7 to 42 a types 55 to 100 a types 130 and 180 a types emc/emi products schaffner group datasheets 2014 mechanical data note: in favour of a better readability, connectors and earth studs are not shown in the horizontal pr ojection. dimensions 7 a 16 a 30 a 42 a 55 a 75 a 100 a 130 a 180 a a 190 250 270 310 250 270 270 270 380 b 40 45 50 50 85 80 90 90 120 c 70 70 85 85 90 135 150 150 170 d 160 220 240 280 220 240 240 240 350 e 180 235 255 295 235 255 255 255 365 f 20 25 30 30 60 60 65 65 102 g 4.5 5.4 5.4 5.4 5.4 6.5 6.5 6.5 6.5 h 1 1 1 1 1 1.5 1.5 1.5 1.5 i 22 22 25 25 39 39 45 45 51 j m5 m5 m5 m6 m6 m6 m10 m10 m10 k 20 22.5 25 25 42.5 40 45 45 60 l2 29.5 29.5 39.5 37.5 26.5 70.5 64 64 47 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m filter input/output connector cross sections -33 -34 -35 -40 -44 solid wire 16 mm 2 35 mm 2 50 mm 2 95 mm 2 10 mm 2 flex wire 10 mm 2 25 mm 2 50 mm 2 95 mm 2 6 mm 2 awg type wire awg 6 awg 2 awg 1/0 awg 4/0 awg 8 recommended torque 1.5-1.8 nm 4.0-4.5 nm 7 8 nm 17-20 nm 1.5-1.8 nm please visit www.schaffner.com to find more details on filter co nnectors. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
|
